BHZYR - 240141-61 HARD/REG INLAY WAX, CASTING WAX
- MSDS: BHZYR
- Manufacturer: J F JELENKO AND CO
- Product Name: 240141-61 HARD/REG INLAY WAX, CASTING WAX
- National Stock Number: 6520-00F011041
Product Identification
Product ID:240141-61 HARD/REG INLAY WAX, CASTING WAX
MSDS Date:03/04/1985
FSC:6520
NIIN:00F011041
MSDS Number: BHZYR
Responsible Party
ARMONK, NY 10504-5000
US
Emergency Phone: 914-273-8600
Info Phone: 914-273-8600
Preparer: M. KRAMER
Cage: 1W395
Contractor
Telephone: 914-273-8600
Cage: 31976
Ingredients
PARAFFIN WAX FUME, PARAFFIN
CAS: 8002-74-2
RTECS: RV0350000
Fraction By Weight: 75-80%
ACGIH TLV: 2 MG/CUM
Hazards
LD50 LC50 Mixture:SKIN RAT 100 MG/24 HR MLD
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYE: IRRITATION.
First Aid
First Aid:SKIN: FLUSH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER FOR
15 MINS. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL
Fire Fighting Procedures:DON'T USE WATER.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SWEEP/SCOOP UP & REMOVE.
Handling
Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING. DON'T
BREATHE DUST, VAPOR, MIST, GAS. STORE AT ROOM TEMPERATURE.
Exposure Controls
Respiratory Protection:USE ONLY NIOSH APPROVED EQUIPMENT (FILTER) DUST,
FUME, MIST.
Ventilation:HOOD IS RECOMMENDED WHEN HEATING MOLDS. USE WITH ADEQUATE
VENTILATION
Protective Gloves:ANY TYPE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED FOR NORMAL USE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
CALLED COMPANY TO REQUEST IF THEY HAD AN UPDATED MSDS FOR THE PRODUCT
JELENKO DENTAL WAXES. SHE SAID THAT THE MSDS'S WERE CURRENT.
5/23/97 SPOKE TO MARCI BUNOYVONG.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:140-158F
Spec Gravity:0.9
Solubility in Water:INSOLUBLE
Appearance and Odor:WAXY SOLIDS, VARIOUS COLORS, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS
Hazardous Decomposition Products:SMOKE, CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.